Media Air Filtration Systems (Centralized)
Media Mist Collector
SmogHog is the most recognized and trusted name for effective removal of mist and smoke within the metalworking industry. Our mist collection technologies have been cleaning the air and recycling machine fluids for companies around the world for over half a century. The SmogHog SHM is a self-contained mist collector that can be mounted directly on a machining center or mounted remotely connecting a single or multiple machines with ducting
For Simple and Effective Collection of Oil Smoke and Mist
Capture Contaminants -- Before They Enter Your Breathing Zone
Coolant-Cat's source capture design collects virtually 100% of coolant smoke and mist generated from metal finishing and forming processes. The unit can be placed directly on or adjacent to a machining center Fase of installation and low maintenaiuv help make the Coolant-Cat a practical and economical solution for capturing harmful contaminants.
Filtration becomes more efficient as the primary filter loads, and unlike other air cleaning technologies, the Coolant-Cat collects small, large and conductive materials. The filters are easy to replace and the media collection...
Models DA, DB and DBM
A simple and economical solution for capturing harmful contaminants.
PRACTICAL AND EFFECTIVE
DA, DB and DBM Media Bag Dust and Mist Collectors can help your plant meet OSHA requirements for employee health and safety by removing contaminants from the air. Designed as a simple and economical solution to collect dry or wet particles, these systems collect small, large or conductive materials. These multi-purpose units contain high-efficiency filters ideal for removing smoke, dust, oil mist and other pollutants from a facility.
Offering a practical and effective solution for collecting contaminants, DA, DB and DBM units come with multiple filtration options to fit your specific pollution control ne...
- DUST-HOG Oil Mist Collectors are ideal for all ducted applications.
- High Output Capacity Radial Blade Fans deliver continuous CFM performance over a wide range of installed applications.
- Dual Stage Filtration is accomplished using slide in 24" x 24" x 2" wire mesh prefilters and 100 square foot fiberglass primary filters.
- Optional Third Stage HEPA Filters are installed when collection efficiency down to 99.97% at 0.3 microns is required.
- Sloped Bottom allows liquid to drain from standard W NPT fitting.
- Legs and Hanger Bracket are standard equipment.
M660 Oil Mist Collector
The new M660is a self-contained media air cleaning systems designed for source capturing coolant mist applications in industry. The M660 can be ordered in three stage filtration which will effectively remove a broad range of contaminants including mist, smoke, soot, vapors, VOC's and more at a rate of up to 1300 CFM.